@article { author = {Attarnejad, R. and Mozaffari, N.}, title = {Structural Eccentricity Evaluation in Iranian 2800 Standard (Technical Note)}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {6}, pages = {735-739}, year = {2012}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {This paper assesses three definitions of eccentricity employed in the description of asymmetric multistory buildings. Other definitions of static eccentricity in multistory buildings fall essentially into one of the above categories. Using the three approaches, formulae are developed to evaluate the asymmetry of shear-type buildings where the deformation is governed by the lateral and rotational rigid-floor displacements arising from the seismic design loadings. Finally by modelling three concrete buildings according to Iranian concrete code (ABA) and investigating these three definitions and comparing them, the best method for representing Iranian 2800 Standard was selected. Simple comparisons and comments on the alternative approaches are presented with the aid of these appropriate examples. This clarification of the definition of eccentricity is needed for improved understanding of the application of codified torsional design procedures. It is also a prerequisite for advanced studies of the inelastic seismic response of multistory shear buildings.}, keywords = {Asymmetric Buildings,Seismic Design.,Shear Buildings,Static Eccentricity}, title_fa = {تعیین خروج از مرکزیت سازه‌ای در استاندارد 2800 ایران (یادداشت فنی)}, abstract_fa = {در آیین‌نامه‌های بارگذاری لرزه‌ای کنونی، اثرات پیچش اتفاقی ناشی از عدم قطعیت موقعیت بارگذاری کف‌ها توسط پارامتری به نام خروج از مرکزیت اتفاقی اعمال می‌شود. تعریف صحیح مرکز سختی که در آیین‌نامه‌های مختلف تعاریف مختلفی داشته و به صورت تابعی از مشخصات سازه‌ای در پلان و یا ارتفاع فرض شده، از اهمیت بسزائی برخوردار است. تمام تعاریف به کار گرفته شده در ادبیات فنی در مورد مرکز سختی و در نتیجه خروج از مرکزیت استاتیکی در قالب یکی از این سه تعریف قابل ارزیابی است. در این مقاله میزان دقت سه تعریف مختلف از مرکز سختی سازه که جهت تعیین خروج از مرکزیت استاتیکی به کار می‌رود، مقایسه شده‌است. برای هر یک از این تعاریف، روابط لازم برای ارزیابی اثرات پیچشی ارائه شده و در مورد سه ساختمان بتن مسلح که بصورت یک بعدی مدل شده‌اند بکار گرفته و نتایج حاصل مقایسه شده‌اند. نتایج این بررسی نشان داده‌است که تعریف به کار رفته در استاندارد 2800 ایران مناسب‌ترین روش برای تعیین مرکز سختی ساختمان‌ها می‌باشد.}, keywords_fa = {اثرات پیچش اتفاقی,خروج از مرکزیت اتفاقی.,طراحی لرزه‌ای ساختمان‌ها,مؤلفه پیچشی زلزله}, url = {https://jcse.ut.ac.ir/article_24927.html}, eprint = {https://jcse.ut.ac.ir/article_24927_557119f3b1d03fbf8216699d2d262350.pdf} }