@article { author = {Maalek, S. and Nouri Rahim Abadi, S. M. H.}, title = {A Study of the Behavior of Building Structures Composed of Double Layer Grid Walls and Ceilings}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {6}, pages = {685-696}, year = {2012}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In the present work, a feasibility study has been carried out in order to investigate the suitability of the use of skeletal double layer grid systems as the ceilings and walls of residential, educational, hospital, commercial and administrative buildings in seismic areas by a series of the nonlinear static as well as dynamic time history analyses of representative models. In the case of the sample single story buildings designed in accordance with the common Allowable Stress Design methods, the pushover analysis results have indicated that a lighter structure with higher stiffness and lateral load carrying capacity can be achieved compared with a similar building composed of the moment resisting frame system. It has been demonstrated that with the imposition of appropriate limitations on member slenderness ratios for a few critical members, the ductility of the structure can be improved considerably. Also, the influence of the slope of the post buckling curve representing the member behavior has been found to be remarkable. A comparison of the response of the structure under the influence of three translational components of ground motion with single component excitation has demonstrated the significance of the consideration of the vertical component of ground motion in the analysis and design of such building structures. With due consideration of the lightweight and high indeterminacy of the structural system under consideration, the preliminary investigation carried out here has revealed that the proposed system is a potential candidate for the mass production of common types of building structures in seismic areas and hence deserves further theoretical and experimental investigations.}, keywords = {Building Structures,Double Layer Grid,Member Buckling,Post Buckling,Seismic Behavior.,Space Structure}, title_fa = {مطالعه رفتار سازه‌های ساختمانی با سقف‌ها و دیوارهای متشکل از شبکه‌های دو لایه فضاکار}, abstract_fa = {در مقاله حاضر، به منظور بررسی امکان‌سنجی و شناخت نقاط ضعف و قوت کاربرد شبکه‌های دولایه فضاکار به عنوان سقف‌ها و دیوار‌ها در سازه‌های مسکونی، آموزشی، بیمارستانی، تجاری و اداری متعارف در مناطق لرزه‌خیز، از طریق مجموعه مطالعاتی تحلیلی به روش‌های استاتیکی و دینامیکی، مدل‌های نمونه سازه‌های فضاکار مورد ارزیابی کمّی قرار داده شده‌اند. در ارتباط با مدل‌های سازه‌های ساختمانیِ یک طبقه نمونه‌ای که منطبق با ملزومات روش‌های طراحی مبتنی بر تنش‌های مجاز طراحی گردیده و مورد مطالعه تحلیلی قرار داده شده‌اند، نتایج تحلیل بار افزون حاکی از آن بوده‌است که می‌توان ضمن کاهش قابل ملاحظه وزن سازه، به سختی و مقاومت به مراتب افزونتری در مقایسه با نمونه سازه قاب خمشی فولادی متناظر دست یافت. همچنین نشان داده شده‌است که با اعمال محدودیت نسبت لاغری بر تعدادی از اعضای بحرانی منتخب می‌توان میزان شکل‌پذیری سازه را به میزان قابل ملاحظه‌ای ارتقا داد. در زمینه اهمیت رفتار پس‌کمانشی اعضا نشان داده شده‌است که میزان شیب پس کمانشی منحنی‌های رفتاری اعضا تأثیر تعیین کننده‌ای در رفتار مجموعه سازه دارد. مقایسه نتایج تحلیل دینامیکی غیر خطی تاریخچه زمانی تحت تأثیر تحریک سه مؤلفه‌ای زمین لرزه با حالت تک مؤلفه‌ای حاکی از آن است که صرفنظر نمودن از اثر مؤلفه قائم می‌تواند قابلیت اعتماد طرح را به طور قابل ملاحظه‌ای کاهش دهد. مقاومت قابل ملاحظه و شکل‌پذیری مطلوبِ حاصل از تحلیل مدل سازه فضاکار با اعمال محدودیت نسبت لاغری در تعدادی از اعضاء کلیدی، تحت تأثیر زمین لرزه آلتادنا با بیشینه شتاب مقیاس شده به g 1.0 (شتاب ثقل)، نوید دهنده آن است که با توجه به سبکی وزن، درجه نامعینی نسبتاً زیاد و قابلیت تولید انبوه صنعتی، سیستم سازه پیشنهادی به عنوان گزینه‌ای ذیربط در احداث سازه‌های ساختمانی متداول فوق‌الاشاره در مناطق لرزه خیز به شمار آید. بنابراین گسترش مطالعات نظری و آزمایشگاهی در این زمینه مورد توصیه است.}, keywords_fa = {رفتار پس کمانشی,رفتار لرزه‌ای.,سازه ساختمانی,سازه فضاکار,شبکه دولایه,کمانش عضو}, url = {https://jcse.ut.ac.ir/article_24923.html}, eprint = {https://jcse.ut.ac.ir/article_24923_0cc79913a00fdec0d799857e1480a24e.pdf} }