@article { author = {Ouhadi, V.R. and Amiri, M. and Goodarzi, A.R.}, title = {The Special Potential of Nano-Clays for Heavy Metal Contaminant Retention in Geo-Environmental Projects}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {6}, pages = {631-642}, year = {2012}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {Recently there have been many researches on the subject of soil-contaminant interaction. However, there are very few researches on the potential of nano-clays to increase the contaminant retention of soils. In addition, reviewing the previous studies shows that the application of nano-clays in geo-environmental engineering has not been taken into consideration. The main objective of this paper is to indicate the special potential of nano-clays for heavy metal contaminant retention. To achieve this purpose, a series of geo-environmental experiments were performed to establish the fundamental aspects of nano-clay and contaminant interaction. To compare the geo-environmental behavior of nano-clay and bentonite, different concentrations of calcite were laboratory added to nano-clay samples. Series of batch equilibrium testing, and buffering capacity experiments were performed and were compared with the experimental results on bentonite, before and after addition of carbonate to nano-clay samples. It is shown that mixtures of nano clay and 8% carbonate have more contaminant retention than that of bentonite sample. In the other part of this paper the process of nano-clays and heavy metal contaminant interaction were investigated by application of XRD analysis. In addition, it is shown that even though carbonate has more impact than surface area on contaminant sorption by soils, the large specific surface are of nano clays is responsible for their very high contaminant retention ability. Therefore, the enhanced nano-clay with carbonate will be very capable for use in geo-environmental projects. The achieved results of this paper show that among bentonite, kaolinite, and four Cloisite nano-clay samples, the order of contaminant retention of samples are as follows: Bentonite > Cloisite®Na+ > Kaolinite > Cloisite®30B > Cloisite®20A > Cloisite®15A However, with addition of laboratory added carbonate to the nano-clay samples, the above order will be changed according to the following order: Cloisite®Na+ > Cloisite®15A ? Cloisite®20A > Cloisite®30B > Bentonite This shows a larger retention by mixture of nano-clays/8% carbonate in comparison with bentonite}, keywords = {Calcite,Contaminant retention.,Heavy metal contaminant,Nano-clay,X-ray diffraction}, title_fa = {قابلیت‌های ویژه نانورسها به منظور استفاده در پروژههای ژئوتکنیک زیست محیطی برای جذب آلاینده‌های فلز سنگین}, abstract_fa = {علی‌رغم تحقیقات وسیعی که در سال?های اخیر در موضوع اندرکنش خاک و آلودگی صورت گرفته‌است در زمینه افزایش قابلیت نگهداری آلودگی توسط نانورس?ها تحقیقات قابل توجهی انجام نشده‌است. همچنین ارزیابی تحقیقات گذشته بیانگر آن است که در پژوهش‌های انجام شده تاکنون، به قابلیت‌های ویژه نانورس‌ها در جذب و نگهداری آلاینده‌های فلزی توجه کاملی معطوف نشده‌است. بر این اساس هدف این پژوهش اثبات ویژگی خاص نانورس‌ها در جذب و نگهداری آلاینده‌های فلز سنگین است. در این راستا با انجام یک سری آزمایش‌های ژئوتکنیک زیست محیطی، رفتار ژئوتکنیک زیست محیطی چند نمونه نانورس و نیز فرآیند اندرکنش نانورس- آلاینده فلز سنگین مورد مطالعه قرار گرفته‌است. به منظور مطالعه و مقایسه رفتار ژئوتکنیک زیست‌محیطی نانورس با بنتونیت و اثبات قابلیت خاص نانورس‌ها در جذب و نگهداری آلاینده‌های فلز سنگین، درصدهای مختلف کربنات به نمونه‌های نانورس مورد مطالعه اضافه شد. با انجام یک سری آزمایش‌های ژئوتکنیک زیست محیطی شامل آزمایش‌های قابلیت جذب و نگهداری آلودگی بر نمونه‌های نانورس، قبل و بعد از اضافه نمودن کربنات، نشان داده شده‌است که قابلیت جذب بیشتر در نمونه بنتونیت در مقایسه با نمونه‌های نانورس صرفاً به‌ واسطه درصد قابل توجه کربنات (8%) در این نمونه است. به طوری که نمونه‌های نانورس غنی شده با این میزان کربنات از قابلیت جذب بیشتری نسبت به نمونه بنتونیت برخوردارند. در این مقاله همچنین فرآیند اندرکنش آلاینده و نانورس به کمک آنجام آزمایش‌های اشعه ایکس مطالعه شده‌است. اگرچه نتایج آزمایش‌های ظرفیت بافرینگ و میزان نگهداری فلز سنگین سرب به وسیله نانو ذرات اصلاح شده در حضور کربنات نشان می?دهد که در مقایسه تأثیر سطح مخصوص خاک و درصد کربنات نمونه، بخش قابل توجهی از ظرفیت بافرینگ و قابلیت خاک در نگهداری آلاینده، ناشی از حضور کربنات است، لیکن بیشتر بودن ظرفیت بافرینگ نانورس‌های غنی شده در مقایسه با بنتونیت، بیانگر کارائی نمونه‌های نانورس در جذب و نگهداری آلاینده‌های فلز سنگین است که این موضوع به سطح مخصوص بسیار بزرگ نمونه‌های نانورس نسبت داده شده‌است. نتایج تحقیق حاضر نشان می?دهد که در نمونه‌های بنتونیت، کائولینیت و چهار نانورس? کلوزایت، ترتیب قابلیت نگهداری آلودگی نمونه?های بنتونیت، کائولینیت و نانورس‌های فاقد کربنات به صورت ذیل بوده است: Bentonite > Cloisite®Na+ > Kaolinite > Cloisite®30B > Cloisite®20A > Cloisite®15A این در حالی است که با افزایش درصد کربنات، ترتیب قابلیت نگهداری آلاینده توسط نمونه‌های رسی فوق تغییر می‌کند. به نحوی که هنگامی که نمونه‌های نانورس با 8% کربنات غنی می‌شوند ترتیب قابلیت نگهداری آلودگی توسط نمونه‌ها به صورت ذیل بوده‌است: Cloisite®Na+ > Cloisite®15A ? Cloisite®20A > Cloisite®30B > Bentonite}, keywords_fa = {پراش اشعه ایکس,جذب آلاینده.,فلز سنگین,کربنات,نانورس}, url = {https://jcse.ut.ac.ir/article_24919.html}, eprint = {https://jcse.ut.ac.ir/article_24919_4e11fe568137e6e2f6741ef97d069f97.pdf} }