@article { author = {Asadiyani, Amirhosein and Tabesh, Masoud}, title = {A Combined Model to Calculate and Manage of Leakage in Water Distribution Networks}, journal = {Journal of Civil and Surveying Engineering}, volume = {44}, number = {1}, pages = {-}, year = {2010}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {Leakage in water distribution networks causes waste of water and economical losses. In this paper a new method is presented to calculate nodal and pipes leakage in water distribution systems using capabilities of EPANET2.10 software. The method estimate the total water losses in the system based on IWA methodology using Minimum Night Flow (MNF) measurements. Recognising the pressure dependency of leakage the total water consumption is divided into two parts, one pressure dependent and the other independent of local pressure. The total leakage is then distributed in different nodes based on nodal pressures and then leakage at each pipe is calculated. Furthermore, the effects of leakage management are evaluated and leakage indices are determined. Based on the outputs of a case study in Ilam Province, the capabilities of the proposed methodology is evaluated. The results show that by combining the new method and hydraulic models the system can be simulated and nodal and pipe leakage are obtained using hydraulic parameters. It can also be observed that leakage performance indices have a great role in leakage management, prioritisation of loss reduction scenarios and budget consumption in water companies. Besides, these indices show the degree of success for leak reduction schemes. Finally, it was found that the infrastructure leakage index (ILI) is the most effective factor on the leakage and the best one to evaluate the leakage performance.}, keywords = {EPANET,Leakage,Leakage Performance Index,Non Revenue Water,Pressure,Water Distribution network}, title_fa = {یک مدل تلفیقی جامع برای محاسبه و مدیریت نشت در شبکه‌های توزیع آب شهری}, abstract_fa = {نشت در شبکه‌های توزیع آب شهری، عامل اتلاف آب و خسار‌ت‌های اقتصادی زیادی است. در این مقاله با استفاده از قابلیت‌های مدل تحلیل هیدرولیکی Epanet2.10، روش جدیدی در محاسبه میزان نشت گره ها و لوله‌ها در شبکه‌های توزیع آب شهری ارائه شده است. در این روش با اندازه‌گیری جریان حداقل شبانه در یک منطقه، نشت کلی شبکه بر اساس استانداردهای انجمن بین المللی آب(IWA) 1 مشخص می‌شود. سپس با تقسیم مصرف هر گره به دو بخش مصارف غیر وابسته و وابسته به فشار (نشت) و شبیه‌سازی هیدرولیکی شبکه به وسیله مدل تحلیل هیدرولیکی Epanet 2.10، مقدار نشت کل شبکه با توجه به میزان فشار گرهی، در هر گره توزیع و سپس نشت مربوط به هر لوله محاسبه می‌شود. آنگاه با استفاده از نرم‌افزار تهیه شده به بررسی اثرات مدیریت نشت در شبکه پرداخته شده و در نهایت شاخص‌های نشت تعیین می‌شود. در ادامه با استفاده از نتایج به دست آمده در یکی از پایلوت های آب به حساب نیامده کشور (واقع در استان ایلام)، قابلیت‌های مدل ارائه شده ارزیابی شده است. نتایج به دست آمده نشان می‌دهد با ترکیب نرم‌افزار تهیه شده و مدل‌های تحلیل هیدرولیکی می‌توان به درستی نسبت به شبیه سازی سیستم و برآورد دقیق پارامترهای هیدرولیکی شبکه اقدام و میزان نشت در هر گره و لوله را به طور واقعی مدل‌سازی و کالیبره کرد. همچنین می-توان نتیجه گرفت که استفاده از شاخص‌های عملکرد نقش بسیار مهمی در زمینه مدیریت نشت و تعیین اولویت های مبارزه با تلفات آب ومؤلفه‌های آن داشته و می‌تواند باعث جهت دهی مناسب در صرف هزینه محدود شرکت‌های آب و فاضلاب در این امر شود. از طرفی این شاخص‌ها میزان موفقیت اقدامات کنترل نشت را در شبکه مورد بررسی مشخص می‌کنند که شاخص نشت زیر ساخت (ILI) که بیشترین میزان فاکتور های مؤثر بر نشت را در خود جای داده است به عنوان کامل‌ترین و دقیق ترین شاخص عملکرد نشت در اولویت قرار دارد.}, keywords_fa = {‌آب‌ به حساب نیامده,تعدیل فشار,شاخص عمل کرد نشت,مدل تحلیل هیدرولیکی,مدیریت نشت,نشت}, url = {https://jcse.ut.ac.ir/article_20758.html}, eprint = {https://jcse.ut.ac.ir/article_20758_cea0be3b1f4525585e882ecfb550246a.pdf} }