@article { author = {Eskandari-Ghadi, Morteza and Ardeshir-Behrestaghi, Azizollah}, title = {Elastodynamic Scalar Potential Functions in Cylindrical Coordinate Systems}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {125-131}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {The aim of this paper is to present scalar potential functions for three-dimensional elastodynamic problems in transversely isotropic media defined by different cylindrical coordinate systems. To do so, the standard cylindrical coordinate system, elliptical cylindrical coordinate system and parabolic cylindrical coordinate system are considered. By virtue of Poisson’s representation, Lamé solution and Chadwick-Trowbridge, the completeness of such representations is addressed. The representations given here are useful in the study of wave scattering from the circular, elliptical and parabolic edges.}, keywords = {Cylindrical Coordinate System,Elastodynamic,Elliptical Coordinate System,Parabolic Coordinate System,Scalar Potential Functions}, title_fa = {توابع پتانسیل اسکالر برای مسائل الاستودینامیک در انواع دستگاه‌های مختصات استوانه‌ای}, abstract_fa = {هدف این مقاله ارائه توابع پتانسیل اسکالر واحد برای حل مسائل انتشار امواج در محیط‌های همسانگرد برای انواع مختلف دستگاه‌های مختصات استوانه‌ای می‌باشد. بدین منظور دستگاه‌های مختصات استوانه‌ای دایره ای (استاندارد)، بیضوی و سهموی در نظر گرفته می‌شوند. قضایای کامل بودن توابع پتانسیل با استفاده از کامل بودن جواب‌های پواسون، لامه و چادویک- ترابریچ اثبات می‌شود. این توابع به خصوص برای تعیین امواج انکساری و انعکاسی از لبه‌های دایره ای، بیضوی یا سهموی مورد استفاده قرار می گیرند.}, keywords_fa = {الاستودینامیک,توابع پتانسیل اسکالر,دستگاه مختصات استوانه‌ای,دستگاه مختصات بیضوی,دستگاه مختصات سهموی}, url = {https://jcse.ut.ac.ir/article_22794.html}, eprint = {https://jcse.ut.ac.ir/article_22794_007d1f5968c6d23298e045377b22f0a4.pdf} } @article { author = {Attarnejad, Reza and Baradaran Hoseini, Seyed Saeed}, title = {Frame Analysis with Random Material Property (Technical Note)}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {133-140}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In this Paper, the stiffness matrix of frame element with random material property (elastic modulus) is derived. Then, the relation between forces and displacements is presented and expansion of the obtained matrix is carried out using Taylor series. The result of this expansion is the mean values and Variability Function of nodal displacements.}, keywords = {Elastic modulus,Finite element,Frame Element,Stiffness Matrix,Stochastic,Taylor series,Variability Function.}, title_fa = {تحلیل قاب با خواص مواد غیرقطعی}, abstract_fa = {خصوصیات تصادفی عموماً به دو دسته وابسته به زمان و مستقل از زمان طبقه‌بندی می‌شوند. عدم قطعیت در هندسه یا خواص ماده غالباً به دسته مسائل تصادفی مستقل از زمان مربوط می‌شوند؛ در حالی‌که عدم قطعیت در بارگذاری و شرایط محیطی در دسته مسائل تصادفی وابسته به زمان جای می‌گیرند. در این بررسی، روش اجزای محدود برای مسائل سازه‌ای شامل المان تیر و قاب صفحه‌ای با خواص مواد غیرقطعی و تحت شرایط بارگذاری استاتیکی (مسائل تصادفی استاتیکی) بسط داده شده است. فرضیات اساسی در این بررسی عبارتند از متغیر در نظر گرفته شدن مدول الاستیسیته ماده، تعریف میدان تغییر مکان (متغیر مستقل از زمان) به‌وسیله یک میدان تصادفی یک بعدی همگن و شرایط بارگذاری استاتیکی قطعی.}, keywords_fa = {اجزاء محدود,المان قاب,تابع تغییر,تصادفی,سری تیلور,ماتریس سختی,مدول الاستیسیته}, url = {https://jcse.ut.ac.ir/article_22795.html}, eprint = {https://jcse.ut.ac.ir/article_22795_3b0ff0a4ff0836a994de74a4e28f7289.pdf} } @article { author = {Jamshidzadeh, Zahra and Tabesh, Massoud}, title = {Evaluation of Orifice Formulation for Leak Detection in Water Supply Systems Considering Unsteady Friction Term}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {155-167}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {Nowadays, water supply utilities in many parts of the world are concerned about water supply. Climate change, drought and population growth as well as immigration, are the most important factors for this situation. Because of limitation for availability of treated water, supplying healthy water even in areas with wet climate is difficult. In encounter with this challenge, reducing water losses in both trunk mains and distribution systems can be a temporary solution. In this research, a novel leak detection technique based on Frequency Response Method using transient flow analysis is presented in order to leak detection in water supply systems. In this method, in order to leak detection and location, steady-oscillatory flow in a pipe system, is generated by the sinusoidal maneuver of a valve in downstream of pipe and is analyzed in frequency domain with matrix transform. It is shown that leak presence in pipe, changes the shape of pressure frequency response. Pressure oscillation amplitude in even harmonies increases and in odd harmonies decreases. By this property, location of leak can be determined. Reliability of other methods depends on large amount of measured data in different parts of the system. The presented method, need to measure pressure and discharge data just in the location of valve. As an advantage of this method, leak discharge can be determined. By an example, the proposed methodology is evaluated and its advantages and disadvantages are distinguished.}, keywords = {Leak Detection,Orifice,Unsteady Friction Term,Water Supply Systems}, title_fa = {ارزیابی فرمول اریفیس در نشت یابی سیستم های آبرسانی با درنظر گرفتن ترم غیر دائمی اصطکاک}, abstract_fa = {امروزه متولیان امور آب در بسیاری از نقاط جهان با چالش روبه رشدی در خصوص تامین آب آشامیدنی مورد نیاز مصرف کنندگان مواجه هستند. عوامل مختلفی در ایجاد این وضعیت نقش دارد مثل: تغییرات آب و هوایی، خشکسالی و رشد جمعیت در اثر مهاجرت به مراکز شهری بزرگ. بدلیل محدودیت منابع آب، تامین آب آشامیدنی سالم حتی در نواحی پر آب نیز با مشکلات عدیده ای روبروست. در برخورد با این چالش ها، کاهش هدررفت آب از خطوط انتقال و شبکه توزیع می تواند یک راه حل باشد. در این تحقیق روش جدیدی بر پایه تحلیل در حوزه فرکانس با فرض جریان ناماندگار که در مدت عملکرد عادی لوله ها اتفاق می افتد، برای شناسایی نشت در سیستم های آبرسانی ارائه می شود. در تکنیک جدید توسعه یافته در این تحقیق برای شناسایی و تعیین موقعیت نشت در لوله ها، جریان نوسانی دائمی توسط باز و بسته شدن متناوب یک شیر در پایین دست لوله ایجاد شده و در حوزه فرکانسی با استفاده از روش ماتریس انتقال تحلیل می شود. نتایج تحقیق نشان می دهد که حضور نشت، در لوله شکل پاسخ فرکانس فشار را تغییر داده، مقدار نوسانات فشار در هارمونی های زوج افزایش و در هارمونی های فرد کاهش می یابد. از این خاصیت برای تعیین موقعیت نشت در لوله استفاده می شود. قابلیت اطمینان سایر روش‌های نشت یابی موجود، بستگی به حجم زیاد داده های اندازه گیری شده در نقاط مختلف سیستم دارد که خیلی آسان نیست. روش ارائه شده در این تحقیق فقط نیاز به اندازه گیری داده های فشار و دبی در محل شیر دارد. با استفاده از این روش علاوه بر شناسایی و تعیین موقعیت نشت، مقدار دبی نشت نیز قابل اندازه گیری است که از مزایای این روش نسبت به سایر روش‌های موجود می باشد. در ادامه با ارائه چند مثال نمونه روش ارائه شده ارزیابی و نقاط قوت /ان مشخص شده است.}, keywords_fa = {اریفیس,ترم غیر دائمی اصطکاک,سیستم های آبرسانی,نشت یابی}, url = {https://jcse.ut.ac.ir/article_22796.html}, eprint = {https://jcse.ut.ac.ir/article_22796_7da58f9a534ac09c84d8c8da374e9ddc.pdf} } @article { author = {Miraboutalebi, Massoud and Askari, Farajollah and Farzaneh, Orang}, title = {Influence of Bedrock Inclination on Seismic Slope Stability Based on Seismic Data of Iran}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {191-201}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In this paper, the effect of bedrock inclination on seismic performance of slopes is investigated. The study was conducted based on dynamic analysis of different slopes, evaluation of the earthquake acceleration in sliding mass, and calculating the permanent displacement of the slope, using Newmark sliding block. The investigation indicates that variation of the bedrock inclination, which results in a change in the predominant period of the slope (Ts), in conditions that the mean period of the time history of the acceleration on critical sliding surface (Tmt) and Ts are close to each other, causes the variation of the acceleration magnitude and the Newmark displacement in the sliding mass and they may reach to their maximum level. Typical results are presented and discussed. A two dimensional model of a typical slope was considered and conducting dynamic analyses, the slope performance was studied for different geometries, strength parameters and shear wave velocities. Such a performance has been studied by assessing the record of acceleration in sliding mass (the mass above the critical sliding surface) and calculating the slope displacement using Newmark method. It is shown that neglecting the effect of bedrock inclination, would lead to non-real results in assessing the seismic slope performance.}, keywords = {Permanent Displacement,Seismic Slope Performance,the Acceleration of the Sliding Mass}, title_fa = {اثر شیب سنگ بستر بر پایداری لرزه ای شیروانی ها بر اساس داده های لرزه خیزی ایران}, abstract_fa = {در این مقاله اثر شیب سنگ بستر بر عملکرد لرزه ای شیروانی‌ها مطالعه شده است. این بررسی با تحلیل دینامیکی شیروانی‌های مختلف، برآورد شتاب زلزله در توده لغزنده و محاسبه تغییر مکان ماندگار این توده با روش بلوک لغزشی نیومارک صورت پذیرفته است. بررسی‌های انجام یافته بیانگر آن است که با تغییر زاویه سنگ بستر با افق و در نتیجه تغییر پریود طبیعی اصلی شیروانی (Ts)، در شرایطی که پریود میانگین تاریخچه زمانی شتاب بر روی سطح لغزش بحرانی(Tmt) و Tsبه یکدیگر نزدیک باشند، بزرگنمائی شتاب در توده لغزش به حداکثر خود خواهد رسید. در این حالت، تغییر مکان ماندگار شیروانی نیز بیشترین مقدار را خواهد داشت. الگوریتم ارائه شده در این مقاله می تواند جهت تهیه نمودارهای لازم برای طراحی لرزه ای شیب‌ها بر اساس عملکرد مورد استفاده قرار گیرد. این نمودارها می توانند در تعیین ضریب شبه استاتیکی لازم جهت عملکرد مورد انتظار یک شیروانی به کار آیند.}, keywords_fa = {تغییرمکان ماندگار,شتاب توده لغزش,عملکرد لرزه ای شیروانی}, url = {https://jcse.ut.ac.ir/article_22797.html}, eprint = {https://jcse.ut.ac.ir/article_22797_5510cfdb676f67b601026a05bb5e191e.pdf} } @article { author = {Mohamadi, Kami and Noorzad, Asadallah}, title = {Determination of Vertical Impedance of embedded Pile in Transversely Isotropic Media Using Hybrid Element}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {219-231}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {The purpose of this study is to determine the dynamic response rod embedded piles in transversely isotropic media under vertical excitation. To do this, hybrid element method has been used in which embedded structure, pile, has been simulated by using rod finite element and also radiation elements have been used for simulating infinite media around the pile. To determine soil-pile stiffness matrix we assemble dynamic stiffness matrix of the finite elements derived from continuous solution with the soil stiffness matrix determined by the inversion of compliance matrix taken from radiation element solution. Finally this matrix is condensed in term of defined degrees of freedom on top of the pile so that the pile impedance in its junction with superstructure in the form of complex number. By using parametric study on the number of elements, dimensionless frequency and aspect ratio, the convergence of impedance is evaluated and its accuracy is controlled by the previous studies of Novak and Liu.}, keywords = {Hybrid Element,Pile,Transversely Isotropic,Vertical Impedance}, title_fa = {تعیین سختی دینامیکی قائم شمع واقع در محیط همسان جانبی با کمک المان ترکیبی}, abstract_fa = {هدف از مطالعه ی حاضر، تعیین پاسخ دینامیکی شمع های مدفون در محیط همسان جانبی تحت اثر ارتعاشات قائم می باشد. برای این منظور از روش المان ترکیبی استفاده شده است که در آن از یک سو سازه ی مدفون یعنی شمع با استفاده از المان محدود میله ای مدل شده و از سوی دیگر المان تشعشعی برای مدل سازی محیط نامحدود اطراف شمع به کارگرفته شده است. با سرهم کردن ماتریس سختی دینامیکی المان های محدود که از حل پیوسته به دست می آید و ماتریس سختی خاک که با معکوس کردن ماتریس نرمیِ به دست آمده از حل المان های تشعشعی تعیین می شود، ماتریس سختی مجموعه ی خاک و شمع به دست می آید. در نهایت این ماتریس بر حسب درجات آزادی تعریف شده در سر شمع فشرده می شود تا امپدانس شمع، در محل اتصال آن با سازه ی فوقانی، به صورت یک عدد مختلط به دست آید. همگرایی جواب‌های به دست آمده در قالب مطالعه پارامتری روی تعداد المان ها، فرکانس بی بعد و نسبت طول به قطر شمع مورد بررسی قرار می گیرد و درستی آن ها با نتایج تحقیقات قبلی Novak و Liu کنترل می شود.}, keywords_fa = {ارتعاش قائم,المان ترکیبی,سختی دینامیکی شمع,همسان جانبی}, url = {https://jcse.ut.ac.ir/article_22798.html}, eprint = {https://jcse.ut.ac.ir/article_22798_7b7695a7da79d91ef547bf917c1edd27.pdf} } @article { author = {Nili, Mahmood and Salehi, Amir Massoud}, title = {What Type and How Much of Pozzolans We Should Use in High Strength Mass Concrete?}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {247-256}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {Hydration heat and strength development at early ages of thirteen mixtures with water-cement ratios of 0.3 and 0.46 were studied. Natural pozzolan and fly ash were used, as partial replacement for cement, in the mixtures. In 0.3 water cement ratio specimens, cement was replaced with silica fume at three percentages of 5, 8 and 11. Hydration heat characteristics of the specimens were determined via a semi adiabatic calorimeter and 4C-Heat software. The results showed that as water cement ratio decreased, heat evolution per 1 kg cementing materials was also decreased. It was concluded that fly ash, as a convenient pozzolan, reduced the hydration heat but increased the strength development.}, keywords = {Early Age Strength,High Strength Concrete,Hydration Heat,Mass Concrete,Pozzolan}, title_fa = {چه نوع پوزولان و به چه میزان در بتن‌های حجیم با مقاومت زیاد بکار ببریم؟}, abstract_fa = {موضوع تحقیق حاضر بررسی اثر نسبت آب به سیمان و جایگزینی پوزولان طبیعی، خاکستر بادی و میکروسیلیس بجای درصدی از وزن سیمان بر حرارت تولید شده ناشی از هیدراسیون سیمان و روند کسب مقاومت اولیه در بتن است. بدین‌منظور 13 طرح اختلاط با دو نسبت آب به سیمان 46/0 و 3/0 ساخته شد. در هر دو نسبت آب به سیمان علاوه بر طرح شاهد، جایگزینی پوزولان طبیعی (15% و 30%) و خاکستر بادی (15% و 25%) انجام شد. جایگزینی میکروسیلیس نیز فقط در بتن با نسبت آب به سیمان 3/0 و به میزان 5%، 8% و 11% وزنی سیمان انجام شد. جهت تعیین رژیم حرارت هیدراسیون هر بتن، از کالریمتر نیمه آدیاباتیک و نرم‌افزار 4C Heat استفاده شد. همچنین مقاومت فشاری نمونه‌های مکعبی در سنین اولیه، 1 تا 7 روز، تعیین گردید. نتایج بدست آمده نشان می‌دهد که با افزایش رده مقاومتی، حرارت‌زایی به ازای هر کیلوگرم مواد سیمانی بتن کاهش می‌یابد. همچنین از بین پوزولان‌های مختلف، خاکستر بادی مناسب‌ترین جایگزین سیمان در بتن‌ با نسبت آب به سیمان زیادتر است.}, keywords_fa = {بتن با مقاومت زیاد,بتن حجیم,پوزولان‌ها,حرارت‌زایی بتن,مقاومت فشاری اولیه}, url = {https://jcse.ut.ac.ir/article_22799.html}, eprint = {https://jcse.ut.ac.ir/article_22799_05cefc7fcb63dfd7b045ada8eac54b09.pdf} } @article { author = {Dadras Javan, Farzaneh and Azizi, Ali}, title = {Investigations on Applicability of Affine Transformation for Geo-Referencing Of Cartosat-1 Imageries}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {257-266}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {The information content of satellite imageries as a mean for providing usable data for disaster forecasting and management, management of natural sources, remote sensing and photogrammetric applications has attracted the worldwide attentions during the last two decades. Since geometric correction of these images is the first and a crucial step for using them, a great deal of research efforts has already been focused on the subject worldwide. Two main approaches are used for geo-referencing of linear array imageries. The first approach is the so called rigorous model. This approach is based on the physical modeling of the motion and attitude variation of the imaging sensor during the acquisition time and is the most accurate and precise model for geometric correction. This model is based on the so called collinearity condition equations and needs the sensor calibration data and the orbital parameters of the satellite, which is not always accessible due to security and economic restrictions. The second approach, known as generic, is independent of any metadata information and solely relies on the ground control points. Varieties of generic models, from rational functions to simple DLT, are in use. However, the great difficulties with these approaches are their dependence on large number of well distributed GCPs. The most precise generic model which is used as a substitute for rigorous model is rational function model (FRM). It has been shown empirically that RFMs in terrain independent mode, which is calculated by fitting the rational function coefficients to the rigorous model, approaches the accuracy of rigorous model. Nevertheless, a very interesting parametric approach, which uses simple 2D to 3D affine transformation, has been experimentally proven to be very promising. This approach has been already evaluated by different researchers worldwide and reasonably accurate results in both flat and hilly terrains have been reported using only few numbers of GCPs. The theoretical basis that justifies the achieved accuracy is the fact that with the high resolution satellite images the very small camera field of view and the high flying altitude makes the incoming signals almost parallel. This renders the perspective geometry along the scan lines to approach the parallel geometry and effectively a homogenous geometry in the scan line and the direction of the satellite motion is produced. This particular geometry provides a simple linear relationship between the image space and the object space and makes a simple eight parameters affine transformation optimum for geo referencing applications. Simplicity of the formulation (i.e. only eight affine parameters for the entire scene and linear form of the equations), and also few numbers of required GCPs and the achieved accuracy makes this approach very attractive from the mapping point of view. The main intention of this paper is to evaluate the potential of the 3D affine transformation as applied to the Cartosat-1 images by implementing an approach which is independent of the field measurements. This is achieved by fitting the affine transformation parameters to the supplied rational function coefficients. Since this approach is not restricted to the field measurement for generating GCPs, a more realistic evaluation of the nature and the limitations of the affine transformation are achieved by generating well distributed fictitious GCPs. Other related issues such as the earth curvature and the influence of the terrain topography are also discussed and analyzed.}, keywords = {3D Affine Transformation,Cartosat-1,High Resolution Satellite Imagery,Perspective to Affine Transformation,Rational Polynomial Functions}, title_fa = {قابلیت استفاده از مدل افاین در زمین مرجع کردن تصاویر سنجنده Cartosat-1}, abstract_fa = {در دنیای امروز استفاده از تصاویر ماهواره ای با قدرت تفکیک بالا به عنوان یکی از مهمترین منابع تامین داده در بسیاری کاربردها مانند مدیریت و پیشگیری از بحران ناشی از سوانح طبیعی، مدیریت منابع معدنی، کاربردهای عمرانی و ... مطرح می‌باشد. از آنجا که اولین مرحله در استفاده از این تصاویر تصحیح هندسی و زمین مرجع نمودن آنها است، در طی سالیان پس از پیدایش و رواج استفاده از این تصاویر تلاشهای فراوانی توسط افراد مختلف در این زمینه انجام گرفته است. ازجمله مدل هایی که برای تصحیح این تصاویر مطرح و مورد توجه بسیار قرار گرفته، تبدیل افاین سه بعدی است که از مزایایی همچون تعداد کم پارامترها، ساختار خطی و عدم وابستگی به پارامترهای مسیر و کالیبراسیون سنجنده برخوردار می‌باشد. در این تحقیق قابلیت استفاده از مدل افاین در تصحیح هندسی تصاویر سنجنده Cartosat-1 ، برای تصاویر اخذ شده از منطقه رودهن در ایران، در مقایسه با مدل رشنال مستقل از زمین مورد بررسی قرار گرفته است. همچنین امکان افزایش دقت حاصل از این مدل و رفع اثر اعوجاجات ناشی از کرویت و ناهمواری های سطح زمین، بررسی شده است.}, keywords_fa = {تابع رشنال,تبدیل سیستم تصویر مرکزی به موازی,تصاویر ماهواره Cartosat-1,تصاویر ماهواره ای آرایه خطی,تصحیح جابجایی کرویت,زمین مرجع نمودن,مدل افاین}, url = {https://jcse.ut.ac.ir/article_22800.html}, eprint = {https://jcse.ut.ac.ir/article_22800_8d25ce4e98cb72a5555db1fe4aae2eda.pdf} } @article { author = {Sazmand, Eslam and Maalek, Shahrokh}, title = {Retrofit of Bridge Bents with the Use of Composite Materials}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {179-190}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In this paper, the Finite Element Model of a typical bridge bent has been created. The 3-D eight-node solid element with the ability of the consideration of concrete cracking in tension and crushing in compression has been employed for the modeling of concrete and the uniaxial tension–compression two-nodes element has been used for the modeling of longitudinal reinforcement. The transverse reinforcement has been included as the concrete element volumetric ratio. For the composite material modeling, the 3-D eight-node laminated element has been used to represent the layers of the material. First, the bridge bent has been modeled in the as-built as well as the retrofitted condition. The numerical analysis results are compared with previously reported experimental results. Good correlations between the numerical and the experimental results have been observed. With the consideration of the observed modes of failure of the composite materials during the experiments, some suggestions have been made here in order to improve the lateral load capacity as well as the ductility of the bent system. This consists of the use of appropriate addition of composite materials in various proposed ways and configurations at the junction of the column to the bent beam connections. Analysis results demonstrated that both the lateral load carrying capacity and ductility of the bridge bent will improve considerably with the aid of the suggested methodology.}, keywords = {Bridge bent,Composite Jacket,finite element method,Monotonic Loading,Reinforced Concrete Jacket,Steel Jacket,FRP}, title_fa = {بهسازی اجزاء و اتصالات پایه‌های قابی شکل بتن‌آرمه پل‌ها با بهره‌گیری از مواد کامپوزیت}, abstract_fa = {در این مقاله از طریق مدل‌سازی و تحلیل مدل اجزاء محدود، پایه قابی شکل1 یک پل نمونه به ‌منظور بهسازی مورد بررسی قرار داده شده‌است. برای مدل‌سازی بتن از المان سه بعدی هشت گرهی با قابلیت در نظر گرفتن ترک‌خوردگی در کشش و خرد‌شدگی در فشار و برای مدل‌سازی آرماتورهای طولی از المان دو گرهی فشاری- کششی تک محوره استفاده شده‌است. آرماتورهای عرضی به‌صورت درصد حجمی در المان بتن منظور شده‌اند و برای مدل‌سازی مصالح کامپوزیت از المان سه بعدی هشت گرهی با خاصیت لایه‌ای استفاده شده‌است. در ابتدا مدل اجزاء محدود پایه قابی شکل پل در شرایط چون ساخت2 و شرایط بهسازی شده ایجاد و نتایج تحلیل عددی با نتایج آزمایشات پیشین مقایسه شده است. پس از اثبات صحت مدل عددی و روش تحلیل، با توجه به‌مشاهدات صورت گرفته از مدهای گسیختگی و نقاط ضعف چنین پایه هایی، مقاوم‌سازی پایه به کمک الیاف FRP در حالات‌ متفاوت صورت گرفته‌است. بر اساس نتایج حاصله راهکارهایی جهت افزایش مقاومت نهایی و شکل پذیری پایه پل ارایه گردیده‌است.}, keywords_fa = {بارگذاری مونوتونیک,پایه قابی شکل,روش اجزاء محدود,ژاکت بتنی,ژاکت فولادی,ژاکت مصالح کامپوزیت,مصالح کامپوزیت FRP}, url = {https://jcse.ut.ac.ir/article_22801.html}, eprint = {https://jcse.ut.ac.ir/article_22801_d613cc422710523f59ffb7f42d99c426.pdf} } @article { author = {Tasnimi, Abbasali and Hashemi, S. Shaker and Soltani Mohammadi, Masoud}, title = {Nonlinear Analysis of 3D Reinforced Concrete Frames Considering Bar-concrete Interaction}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {141-154}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {In this paper a new method for nonlinear analysis of three dimensional reinforced concrete frames (3D-RCF) under cyclic and monotonic loading is proposed. Each reinforced concrete frame is divided into two types of joint and beam-column elements. The effect of bond-slip has been considered in the formulation of beam-column element. The effect of biaxial flexure and axial load on the cross section is assumed for nonlinear behavior while the effect of tensional behavior of beam-column element is assumed linear. The pull-out effect of reinforcing bar is considered in the formulation of joint elements. Formulation and relevant equations are displacement based upon which a computer program is developed. The reliability of the method has been assessed through the comparison of numerical and an experimental result by achieving of excellent agreement. Also the effect of bond-slip and bar pull-out occurring at joint on the response of RC frames is evaluated by utilizing various analyses.}, keywords = {3D Reinforced Concrete Frames,Bar-Concrete Interaction,Continuity-Slip Effect,Nonlinear analysis}, title_fa = {تحلیل غیرخطی قاب‌های بتن مسلح سه بعدی با تاثیر اندرکنش بتن و میلگرد}, abstract_fa = {در این تحقیق روشی برای تحلیل غیرخطی قاب‌های بتن مسلح سه بعدی تحت اثر بارگذاری تناوبی و بار افزون ارائه شده است. هر قاب بتن مسلح به المان‌های تیر- ستونی و اتصال تقسیم بندی شده و در المان تیر-ستون اثر پیوستگی- لغزش مدل‌سازی شده است. اثر خمش دو محوره در مقطع به همراه نیروی محوری به صورت غیرخطی ولی رفتار پیچشی المان تیر-ستون به صورت الاستیک فرض شده است. در مدل‌سازی المان اتصال اثر بیرون کشیدگی میلگرد لحاظ شده است. معادلات و روابط حاکم بر مبنای تغییرمکان استخراج شده و به کمک آن برنامه کامپیوتری تهیه شده است. نتایج تحلیلی در مقایسه با نتایج آزمایشگاهی مورد ارزیابی قرار گرفته و دقت بسیار خوبی حاصل شده است. همچنین به کمک تحلیل های متنوع میزان تاثیر عوامل پیوستگی-لغزش و بیرون کشیدگی میلگرد از درون اتصال در پاسخ تحلیلی قاب‌های بتن مسلح مورد بررسی قرار گرفته است.}, keywords_fa = {اثر پیوستگی-لغزش,اندرکنش بتن و میلگرد,تحلیل غیرخطی,قاب بتن مسلح سه بعدی}, url = {https://jcse.ut.ac.ir/article_22802.html}, eprint = {https://jcse.ut.ac.ir/article_22802_96056d666fd101b5b0260fac094c0ac5.pdf} } @article { author = {Habibnejad korayem, Asghar and Moharrami, Hamid and Mazrooie, Ali}, title = {Investigation on Effect of Columns Stiffness on the Behavior of Thin Steel Shear Walls}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {169-178}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {Steel shear walls that are used in two (thin and stiffened) forms, are innovative systems for resistance against wind and earthquake lateral loads. The thin type of steel shear wall has recently attracted the researcher’s interests. A major problem in the design of steel shear wall is the design of its supporting columns. This paper presents the laboratory test results on the investigations on the effect of stiffness of columns on the behavior and performance of thin steel shear wall. Accordingly four two-story one-bay half scale test samples of steel shear walls in which they differed only in the column properties, were tested under cyclic loading. Test results show that although the load carrying capacity, deformability and stiffness of the steel shear wall, increase due to increase in columns stiffness but these properties are not proportional to the stiffness of supporting columns. It was also observed that the steel shear walls are very much ductile/deformable and have high energy absorbing capacities.}, keywords = {Column Stiffness,Diagonal Tension Field,Ductility,Energy Absorption,Post Buckling Strength,Thin Steel Shear Wall}, title_fa = {بررسی اثر سختی ستون‌ها بر رفتار دیوارهای برشی فولادی جدار نازک}, abstract_fa = {دیوارهای برشی فولادی که به دو صورت جدار نازک و تقویت شده کاربرد دارند، یک سیستم ابتکاری برای مقاومت در برابر بارهای جانبی باد و زلزله می باشـند و در دهه های اخیر نوع جدار نازک آن مورد توجه محققین قرار گرفته‌ است. یکی از مشکلات پیش رو در طراحی دیوارهای برشی فولادی طراحی ستون‌های نگهدارنده این‌گونه دیوارها است. این مقاله نتایج آزمایشات انجام شده برای بررسی اثر سختی ستون‌های نگهدارنده دیوار برشی فولادی بر چگونگی رفتار و عملکرد دیوارهای برشی فولادی جدارنازک را ارائه می دهد. برای این کار چهار دیوار برشـی فـولادی یک دهانه و دو طبقه که تنها در ستون‌ها با یکدیگر تفاوت داشتند با مقیاس 2/1 ساخته شـده و تحت بارگذاری چرخـه‌ای قرار داده شدند. آزمایش‌های انجام شده نشان می‌دهند که گرچه با افزایش سختی ستون‌ها بر میزان ظرفیت باربری، شکل پذیری و سختی دیوار برشی افزوده می شود، اما این افزایش متناسب با افزایش سختی ستون‌ها نمی باشد. همچنین مشاهده شد که این دیوارها دارای شکل پذیری بسیار خوبی بوده و از ظرفیت اتلاف انرژی بسیار بالایی برخوردار هستند.}, keywords_fa = {جذب انرژی,دیوار برشی فولادی جدار نازک,سختی ستون‌ها,شکل پذیری,مقاومت پس کمانشی,میدان کششی قطری}, url = {https://jcse.ut.ac.ir/article_22803.html}, eprint = {https://jcse.ut.ac.ir/article_22803_fd2f5e3dda6afed352a21394dd04a521.pdf} } @article { author = {Kalali, Arsalan and Kabir, Mohammad zaman}, title = {Out-of-Plane Performance Based on Homogenization & Micromechanics Approach}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {203-217}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {For analyzing and assessing the seismic vulnerability of masonry buildings, it is necessary to specify the main structural properties of walls such as stiffness, ultimate load bearing capacity, etc. Although micro modeling is essential in a brick wall, it is difficult and approximately impractical due to the pattern of arrangement of bricks and bed and head joints of mortar and their large quantity. In macro modeling, masonry materials are replaced with an equivalent homogeneous material. In the present research, a set of analytical equations was established for determining the mechanical properties of this equivalent homogeneous material. The results of the proposed method for homogenization of unreinforced brick walls were compared with those of detailed modeling in different situations of solid walls under in-plane loading, and it was found that this method provides suitable accuracy in estimation of the wall linear properties such as stiffness and the wall nonlinear properties such as ultimate strength. Additionally, this proposed modeling method is simple and quick and needs very little input data.}, keywords = {Analysis,Brick walls,Homogenization,In-plane loading,Stiffness,strength}, title_fa = {محاسبه ثوابت الاستیک دیوارهای آجری غیرمسلح بر اساس دیدگاه همگن‌سازی و میکرومکانیک در عملکرد غشایی و خمشی}, abstract_fa = {برای تحلیل و ارزیابی آسیب‌پذیری لرزه‌ای ساختمان‌های بنایی، تعیین مشخصات اصلی سازه‌ای دیوارها مانند: سختی، ظرفیت باربری نهایی و … ضروری است. مدل‌سازی میکرو در یک دیوار آجری به علت نحوه قرار گرفتن آجرها و درزهای افقی و قائم ملات و تعداد زیاد آنها، بسیار مشکل و تقریبا غیرکاربردی است و نیاز به انجام مدل‌سازی ماکرو می‌باشد. در مدل‌سازی ماکرو، یک ماده همگن جایگزین مصالح بنایی می‌شود. در تحقیق حاضر، یک سری روابط تحلیلی جهت تعیین مشخصات این ماده همگن معادل استخراج شده است. نتایج حاصل از روش پیشنهادی جهت همگن‌سازی دیوارهای آجری غیرمسلح، در حالات مختلف دیوارهای توپر در بارگذاری داخل صفحه‌ای با مدل‌سازی دقیق مقایسه و مشخص شد که دقت مناسبی در برآورد مشخصات خطی دیوار مانند سختی و مشخصات غیرخطی دیوار مانند مقاومت نهایی دارد و در عین حال، باعث سهولت بسیار زیاد در مدل‌سازی و تحلیل ساختمان‌های بنایی می‌شود.}, keywords_fa = {بارگذاری داخل صفحه‌ای,تحلیل,دیوار آجری,سختی,مقاومت,همگن‌سازی}, url = {https://jcse.ut.ac.ir/article_22804.html}, eprint = {https://jcse.ut.ac.ir/article_22804_fe6901c14b20cd482169bcfbb417fa81.pdf} } @article { author = {Mansoori, Mohammadreza and Naseri, Hasan and S. Moghadam, Abdolreza}, title = {Experimental and Analytical Study of Asymmetric Structures with Different Viscous Damper Distribution}, journal = {Journal of Civil and Surveying Engineering}, volume = {45}, number = {2}, pages = {233-245}, year = {2011}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {During the past decade, there were a lot of studies on the effect of energy dissipating devices such as dampers for controlling structural response in earthquake. Using a suitable distribution of these devices may have extra advantages by minimizing torsional effects in buildings. This investigation deals with a comparison study performed between the experimentally observed and numerically predicted dynamic behavior of a 1/6 scale structure with viscous dampers. The setup consists of a one-story model with one-way stiffness asymmetry which is connected to a rigid base structure by two viscous dampers. Both structures were located on the shaking table and the tests were conducted using 6 earthquake records. Several damper distributions have been considered and for each one, lateral displacement, lateral acceleration and diaphragm torsion of the model were recorded. The separate tests on dampers show that their dynamic properties are completely dependent on frequency and amplitude of the motion. The comparison between the experimental and numerical model shows an acceptable similarity in the response time histories. The results indicates that asymmetry effects on lateral displacement is minimized if the damping center is located at a distance equal to stiffness eccentricity in the opposite side of stiffness center with respect to the center of mass. Also, if the damping center is located near the center of mass on the flexible side with a high damping radius of gyration, diaphragm torsion is minimized. No suitable distribution was found for controlling lateral acceleration in this research.}, keywords = {Cyclic Loading,Damping Radius of Gyration,Flexible Edge,Lateral Displacement,Structural Torsion,Viscous Damper}, title_fa = {بررسی آزمایشگاهی و تحلیلی اثر توزیع میراگر ویسکوز بر رفتار سازه نامتقارن}, abstract_fa = {در سال‌های اخیر، بررسی کنترل پاسخ ساختمانها در زلزله با استفاده از تجهیزات استهلاک انرژی نظیر میراگرها همواره از اهمیت ویژه‌ای برخوردار بوده است. توزیع مناسب این تجهیزات در بین المان‌های سازه ای امکان کنترل پیچش و در نتیجه بهره برداری مضاعف را از آنها فراهم می کند. در این مقاله اثر توزیع میراگرهای ویسکوز بر رفتار پیچشی سازه به صورت آزمایشگاهی مورد مطالعه قرار می گیرد. برای این منظور یک مدل نامتقارن یک طبقه فولادی با مقیاس1 به 6 بر روی میز لرزان مورد آزمایش قرار گرفته است. دو میراگر از نوع ویسکوز با توزیعهای مختلف، دیافراگم سازه را به تکیه گاه متصل نموده و برای هر حالت توزیع میراگر تغییر مکان جانبی، شتاب جانبی و چرخش دیافراگم سازه برای 6 شتابنگاشت ثبت شده است. همچنین آزمایش‌های بارگذاری چرخه ای به منظور تعیین مشخصات دینامیکی میراگرها انجام شده که وابستگی زیاد مشخصات آنها را به عواملی نظیر فرکانس و دامنه حرکت نشان می‌دهد. مقایسه نتایج حاصل از مدل آزمایشگاهی با مدل‌سازی عددی، همسانی مناسبی را در روند پاسخ‌های تاریخچه زمانی در دو حالت نشان می‌دهد. بررسی‌ها بر روی نتایج نشان می دهد توزیعهای مناسبی از میراگرها وجود دارند که می توان تغییر مکان جانبی و چرخش دیافراگم را تا حد امکان کنترل نمود به گونه ای که رفتار سازه به حالت متقارن نزدیک شود. در حالی که برای کنترل شتاب جانبی و برش پایه، توزیع مناسبی حاصل نشده است.}, keywords_fa = {بارگذاری چرخه ای,پیچش سازه,تغییر مکان جانبی,شعاع ژیراسیون میرایی,لبه نرم,میراگر ویسکوز}, url = {https://jcse.ut.ac.ir/article_22805.html}, eprint = {https://jcse.ut.ac.ir/article_22805_f5296a22cf3c16e11ca8f94a9500e34c.pdf} }